wet method

英 [wet ˈmeθəd] 美 [wet ˈmeθəd]

湿法

化学



双语例句

  1. Industrial practice for production of lithopone by wet method with zinc bearing waste from flue dust of steel plant
    用钢铁厂烟道灰含锌废料湿法生产立德粉工业实践
  2. Optimized Design for Cooling Structure of Process Burner Used for Wet Method Gasification Technology
    湿法气化技术工艺喷嘴冷却结构优化设计
  3. On the basis of improving the fabrication process of in-direct wet method, the β-Li3TaO4 ceramic pebbles with small diameter of0.
    本文在改进间接湿法制备工艺的基础上,采用直接湿法制备了直径为0。
  4. A new technology of wet method for synthesis of magnesium stearate by saponification of stearic acid with fleshly formed magnesium hydroxide in aqueous medium is described.
    介绍一种在水介质中由硬脂酸与新生成的氢氧化镁进行皂化反应合成硬脂酸镁的湿法新工艺。
  5. This article briefs the basic principle and technological process of wet method FGD and emphatically introduces its technological core-jet bubbling reactor ( JBR).
    介绍了鼓泡塔湿法脱硫的基本原理以及工艺过程,其工艺核心为鼓泡式反应器。
  6. DG Series of Air Stream Dryer is drying plant for to dry maize, potato alike and other starch material processed by wet method after dewatering process.
    DG系列气流干燥机组是用于湿法加工玉米,薯类及其它原料淀粉脱水后烘干的成套设备。
  7. The handling of the tail gas from the wet method phosphoric acid device is introduced.
    主要介绍了湿法磷酸装置的尾气处理。
  8. On cement mixing pile ( wet method) construction and quality detection and acceptance
    浅谈水泥搅拌桩(湿法)施工与质量检验及验收
  9. The Comparison between Normal Wet Method and Jet Bubbling FGD Technology
    常规湿法与鼓泡脱硫技术的比较研究
  10. Research on Anisotropic Etching Processing Technique with Wet Method on Silicon Devices
    硅器件湿法各向异性腐蚀加工技术研究
  11. Study on Influence of Wet Method Desulphurization System on Boiler Tail Flue Gas Duct and Stack
    湿法脱硫系统对锅炉尾部烟道和烟囱影响的研究
  12. Expatiate the dry and wet method process of AA powder added in milk powder.
    阐述了乳粉中花生四烯酸(AA)粉剂的干法和湿法生产的工艺过程。
  13. This paper expounds the important position, role and working priciple of nozzles in the limestone-gypsum wet method FGD technology, briefs the main performance parameters of nozzles and analyzes the performance features of several kinds of nozzles.
    文章论述了喷嘴在石灰石-石膏湿法工艺中的重要地位、作用和工作原理,介绍了喷嘴的主要性能参数,分析了几种喷嘴的性能特点。
  14. Utilizing the purification mechanism of wet method and centrifugation, develops a set of cooking smoke purification device.
    利用湿法与离心分离法净化机理,研制出旋风喷雾油烟净化装置。
  15. Experiment on cleaning effect of oil smoke through an atomizing wet method combined with filtrating adsorption
    雾化湿法与过滤吸附相结合的净化试验研究
  16. Analysis of Important Affecting Factor for Wet Method Producing Techniques Of Modified Starch
    变性淀粉湿法生产工艺与影响产品质量和稳定的重要因素探讨
  17. And coMPare with the wet method, the fire method even more ideal.
    而与湿法回收相比,火法回收更为理想。
  18. The article makes an introduction of new sintering process with wet method of coal rear-feeding in raw mix and it also verifies the feasibility.
    本文介绍了一种生料煤湿法后加的烧结法生料掺煤新工艺,并对其可行性进行了研究论证。
  19. Sample of vermicelli was digested by wet method, and its aluminum content was determined by the ICP-AES method.
    粉丝样品经湿法消化后,采用电感耦合等离子体发射光谱法(ICP-AES)测定其中的铝含量。
  20. According to absorbent with or without water during desulphurization, desulphurization methods conclude wet method, semidry method and dry method.
    脱硫方法根据脱硫过程中脱硫剂中有没有水出现,可分为湿法、半干法和干法。
  21. This paper has discussed the formula designing of PU synthetic lether coated nonwoven fabric by wet method and its manufacturing technology, the problems and their treatment methods in processing have been introduced too.
    讨论了无纺布基湿式PU合成革的配方设计原则及其工艺过程,介绍了生产中易出现的问题及解决办法。
  22. This paper studies the equipments and techniques of the recovery of wasted computer circuit board through physical method including the fragmentation and separation of wasted circuit board, separate metals and nonmetals through dry and wet method, etc.
    本文研究了用物理方法处理回收废旧电脑线路板的设备和工艺,主要包括废旧线路板的破碎和解离、用干法和湿法分选技术分离金属和非金属等;
  23. METHODS: Lanthanum tracer electronic microscope method and drying wet method.
    方法:镧示踪电镜法和干-湿重法。
  24. This paper discusses the calculation method of pulp feed-in pipe of processing equipment for making GMT sheet with wet method.
    本文讨论了GMT片材湿片成型装置中的进浆总管的计算方法。
  25. Process flow sheet, design feature, operating parameters of the grinding section of phosphoric acid plant with Bi-water wet method is introduced. A brief analysis and comparision of grinder's selection is also discussed.
    介绍二水湿法磷酸生产磨矿工段的工艺流程、设计特点以及操作控制参数,并对磨机的选型进行了初步分析比较和探讨。
  26. Design Improvement of Recovering and Purifying System of Converter Gas with Whole Wet Method
    全湿法转炉煤气回收净化系统设计改进
  27. A new technology route and the conditions of whole recovery by wet method from waste catalyst of hydrodesulphurization in the oil refining process were proposed.
    提出了石油精炼过程中产生的加氢脱硫镍-钼-铝系废催化剂的湿法全回收新工艺路线和工艺条件。
  28. Selection and Layout Design of Nozzles in Limestone-Gypsum Wet Method FGD
    石灰石-石膏湿法FGD中喷嘴的选择及布置设计
  29. The preparation methods are sub-divided into two: the wet method and the solid phase method.
    本文首先研究了重要原材料&氟化锂(LiF)的制备新方法,分为湿法、固相法两种方法制备。
  30. Fatty acid diethanolamide borate ester was used to modify brucite by wet method as surfactant.
    最后,将脂肪酸二乙醇酰胺硼酸酯作为一种表面改性剂,考察其对无机阻燃剂水镁石的表面改性效果。